Side Disc Cutter Series (Slitting cutter)
Use the lock adjustable screw to fine-tune the groove size.
Insert seat tooth design for added stability.
Adjustable size 6~8mm. (Adjustable range 2mm)
Open Catalog
HCM / ACM Milling Cutter (Aluminum body Mirror finish cutter)
High-speed processing requirements for electronic industries, such as Aero-space, bicycle, locomotive, mold and other industries.
The insert seat has a fine-tuning structure, which makes the insert adjust the p level, and the cutter is tightly combined with the, insert seat to prevent detachment during high-speed rotation.
The cutting process can also effectively remove chips and prevent surface damage during cutting.
Through-tool coolant to efficiently cool the work-piece and improve cutter life.
Through-tool coolant to efficiently cool the work-piece and improve cutter life.
Special radial and axial dynamic balance adjustments for improving the cutter's dynamic balance.
Polycrystalline diamond insert has the advantages of high hardness, high compressive strength and good wear resistance. It is suitable for high-speed cutting. The maximum speed can reach 33000 rpm, which can obtain the best processing precision and efficiency Mirror surface.
Open Catalog
DP Antivibration Tool
For most efficient results use for 4D-8D machining. Adjust the scale of each grid to a diameter of 0.002mm. The integrated damper and extension with generic MCK/CK arbors achieve wider cuts and better accura-cy. No matter the specifications or the desired function the coolant runs through the spindle. The bilateral symmetry joint allows for almost zero vibration.
The CBH/DP is most efficient cutting deaply. It enhanc-es the workpiece's surface finish and has a longer life.
Open Catalog
Mini EndMill
The MAS type cutters are available from 8 to 63 mm. We also have screwed on type structure which can be combined with tungsten carbide extension. They are suitable for small and interference cutting expecially for electronics industries.
Low-resistance and high-precision design are good for interrupted cutting. composite coating helps to improve insert life.
Open Catalog
SSP Chamfering Series (Chamfering and engraving tool)
Chamfering, v-grooving, the 45° spot drill can be used for carving and spotting.
Clerance angle negates interference between the insert/cutting tool and the workpiece during v-grooving and spotting.
Could be applied on milling machine, CNC milling machine and CNC lathe.
Open Catalog
PNER (3 Micron Accuracy)
PNER Chuck and collet efficently improve the accuracy in cutting process decrease costly re-machineing time and extend the tool life for keep the precision of machine spindle. Reduce the tool production the cost and increase production efficency to meet requirement with high quality and high efficency.It has a runout accuraccy 3micron.its suitable for both roughing and finishing operations...
Open Catalog
SBF Radial zero Adjustable Holder
Extend the tool life.
Keep the machining performance steady.
Improve the surface roughness.
Open Catalog
BT/SAR angle head holder
The spindle chuck is designed to be #30 taper type, which can be used to match multiple and suitable adapters according to different processing requirements.
Gear ratio 1:1, the spindle doesn’t need to turn counterclockwise.
The fixed block is available for coolant system
The design of angle scale enables users to easily adjust to the processing angles they need.
Max. revolution: 3000 rpm.
Standard taper for the spindle chuck is #30(BT30). Other types of taper can be custom-made.
Water pressure: 7kgf/cm².
BT/SAU angle head holder
The Adjustable angle increment is 1˚ and the spindle chuck (output) can be adjusted from 0˚ to 90˚.
Achieve various demands and different types of applications like machining on the inclined surfaces, processing the clearance and draft angles on molds, etc.
Coolant feed through dowel pin, coolant outlet from coolant hose.
Maximum revolution: 4000rpm
Maximum torque: 40N･m
Recommended cutting depth ≤ 4mm
Workable for ATC automatic tool change system.
Open Catalog
STH Tapping Holder
Effectively eliminate backlash and excessive torque.
High quality tapping.
Extend tap life
Open Catalog
Spindle Master Bar Series (Spindle test bar)
High precision, high stability.
Regular mechanical spindle precision detection to prevent the occurrence of bad processing problems.
Open CatalogClamping Systems
OKV
Self Center
General
Double Clamping
Hydraulic vise
AH hydraulic precision vise
LM - VE - H hydraulic & angle lock vise
Jaws are made of special steel which is hardened and ground.
Body is made of high qulity cast iron, which resists deflection or bending and its siding surface flame hardened and ground
We offer a variety of hydraulic vise option to you to choose from our catlogue
Hydraulic vise has strength and powerful clamping force its suitable for steel work piece on heavy cutting process
Open Catalog
Optical Measuring tool Presetter
There’s no interference when you adjust the height of flute because you can adjust and lock the insert screw directly, measure it from the outside of machine. It is able to raise the efficiency of measurement.
Open CatalogShrink Fit machines
HF-2200 shrink easy hot - air heater
SFC shrink - fit machine
SFC shrink - fit machine
Voltage : 1 Pahse 220V
Max. power :3000W
Suitable for heating solid carbide tols 3-20mm
Air cooling :3 mins for urgent need of tool change press reset button while colling reaches 1min
Standard accessories tool holder adapters induction rings and height plus seats
Before heating make sure the tool shank tolerence is h6
Open Catalog
SMB Finish Boring head
One division for adjustment is 10micron on diameter.
The insert seat is designed to have a coolant hole at the side and has good effect of chip evacuation and heat dissipation .extends insert use life
These are the three seats.The standard attachment is SIC-1 insert seat SIC-2 and SIC-3 inserts seat can be orderd to expand the boring range
SIC-2 and SIC-3 insert seats can be used for back boring
Modular MCK system and exchangeable with CK system on the market
The adjustable screw with almost no thread clearence enhance adjusting accuracy also the pre-balance of the boring head enables SMB to be applicable for high speed
The unique design of SIC insert seat enables it to connect with boring head body tightly having better rigidity precision and proof effect.
Open Catalog
Oil hole tool holder(Through coolant attachment)
Used for machines W/O Center or side coolant and achieve through coolant tool
Internal hole tolerence is H5
Max: revolution :3000rpm
Max: Water Pressure.7kgf/cm2
For special demand to achieve higher revolution and higher water pressure custom-made order is acceptable
Open CatalogRoughing boring head
SCK
SRW roughing boring head
Both insert seats move simultaneously while setting diameter which makes the adjustment precise and the save time
High rigidity results from a perfect contact between the insert seat and the boring head body suitable for big table feed (f) cutting heavy duty and interputed boring .
The small difference of heights between two inserts seat decrease the vibration caused by cutting impendence while touching a work piece.
Modular MCK system and exchangeable with CK system on the market
The coating surface treatment improves chips adhesion increase heat resistence and extends using life
Open CatalogSBF Runout Adjustable Holder
Suitable for reaming and drilling
Improve the surface accuracy of workpieace.
Ensure the maching stability in hole making
Compensate for bad runout accuracy generated from machine spindle tool holder and cutter adjust runout accuracy to be within 2micron and extend tool use life
Simple and quick to adjust by 3 Screws
Center coolent through is available and can be up to 70 bar.
Open Catalog
Torque Screw driver
Ideal for tasks required specific torque
Ergonomic T- Handle easy and safe to operate
Indexable can be used under different occasions.
There wiil be Clicking sound when reach the specific torque as a reminder to user from damaging workpiece
Open Catalog
HSS bite torx set
TW
TW
LM - SG fast drill re-sharpening machine
LM-SG-213
LM-SG-830
Drill resharping is used to regrinding HSS and carbide drill bits. Adjust the drill point angle upto 90-140degree .
We can regrinding very fast and with high accuracy very easy to operate
Open CatalogRevolving Center
sc-69
sc-70
Features:
Center shaft and body are made of alloy steel and hardened to HRC 60
center is assembled with thrust bearing needle bearing and ball bearings
Suitable to medium and high speed lathes with heavy loads.
Open Catalog